- Swarg Ashram Road, Hapur, Uttar Pradesh
- GST NO. : 09DFIPS9046Q1Z9
- View Mobile Number
Industrial Catalysts & Chemicals
Leading Manufacturers, Exporters and Wholesaler of Copper Catalyst For Nitrogen Plant, Nickel Catalyst Ball, Nickel Catalyst for Ammonia Cracking, Palladium Alumina Catalyst and Palladium Catalyst For Hydrogen & Nitrogen Plant from Hapur.
| Business Type | Manufacturer, Exporter, Supplier |
| Purity | 50 % |
| Packaging Size | 25 Kg |
| Packaging Type | HDPE Bag |
| Color | Black |
| Grade Standard | Technical Grade |
| Physical State | Granules |
| Application | For Nitrogen Plant |
| Material | Copper Catalyst |
| Country of Origin | Made in India |
| Brand Name | PSG Engineering |
Preferred Buyer From
| Location | Worldwide |
Product Description:
- We are extremely engaged in providing Copper Catalyst for Nitrogen Deoxo. These products are recognized in the market for their top features.
- Copper catalyst for PSA Nitrogen Generator Copper De-Oxo
- Genuine deoxo copper catalyst for your nitrogen generator
- Guaranteed performance
- Irrespective of which make Nitrogen generator you have, we can supply you the correct copper catalyst
What is Copper Catalyst?
For production of high purity gases such as Nitrogen, requires use of high activity catalysts for the removal of impurities. Oxygen is a major impurity in inert or reactive gases and therefore reducing its concentration is a subject of continual interest. Chemisorption with subsequent catalytic reaction always offers an economical and effective way to purify gases. Copper catalysts are frequently used in the above described applications. The goal of using copper catalyst is the removal of oxygen from nitrogen, thereby delivering high quality inert gas with ppm levels of Oxygen remaining.
What level of Oxygen will remain after catalytic reaction?
Copper catalyst removes oxygen from gases containing a maximum of 1.0 to 1.5 vol.% O2. In this case, it is possible to achieve a purity of 1-5 ppm. For the adsorption of oxygen, room temperature is sufficient. The total amount of oxygen that is absorbed by the catalyst, however, largely depends on the temperature.
Is the catalyst supplied - ready-to-use?
Catalyst is always supplied in unreduced state.
How is the catalyst prepared for use?
The catalyst can be activated in either a tubular reactor with heat exchange or in an adiabatic-type reactor. The reduction starts in either reactor by heating the catalyst in a stream of nitrogen to a temperature of 140 to 160°C. Subsequently, hydrogen is added to the nitrogen at such a rate that a temperature of 250°C is not exceeded. The reduction should be completed at a temperature of min. 230°C with undiluted hydrogen.
| Business Type | Manufacturer, Exporter, Supplier |
| Country of Origin | Made in India |
| Physical State | Balls |
| Material | Nickel Catalyst |
| Packaging Type | HDPE Bag |
| Packaging Size | 25 Kg |
| Color | Grey |
| Operating Temperature | 1050 Degree Celsius |
| Size | 10 mm |
| Porosity | 40% |
| Nickel | Min 6% |
| Bulk Density | -1.3 + 0.1Kg/litter |
| Brand Name | PSG Engineering |
Preferred Buyer From
| Location | Worldwide |
We have extended our range of supported Nickel to cover the requirement of endo gas generator. These catalysts find applications in generation of inert/ reducing atmosphere for ferrous metal treatment. These catalysts are available in sizes as balls
Areas of Application
- Production of Endo gas for steel treatment.
- High cold crushing strength
- Low-pressure drop.
Storage:
Avoid damping and any adsorption of water or organic substance before use. Otherwise it must be regenerated.
| Business Type | Manufacturer, Exporter, Supplier |
| Physical State | Solid |
| Grade Standard | Technical Grade |
| Material | Nickel Catalyst |
| Packaging Type | HDPE Bag |
| Packaging Size | 25 Kg |
| Color | Grey |
| Ni Content | Greater Than or Equal to 6 % |
| Size | 18x20 mm |
| Shape | Cylinder |
| Country of Origin | Made in India |
| Application | Used in Ammonia Cracker Plant |
| Brand Name | PSG Engineering |
Preferred Buyer From
| Location | Worldwide |
Nickel Catalyst is provided with the properties. It is used in the ammonia decomposing furnace to decompose the HN3 and HCN into N2, H2 and CO2. And so as to effectively purify the coke-oven gas for the sake of environmental protection and prevent the equipment from corrosion.
| Business Type | Manufacturer, Exporter, Supplier |
| Application | Used In Nitrogen Gas Plant |
| Physical State | Balls |
| Grade Standard | Technical Grade |
| Ball Size | 3-5 mm & 5-8 mm |
| Shipping Density | 0.8+/-0.1 Kgs/ltr |
| Bulk Density | 0.7-0.90 Kg/Lt |
| Chemical Formula | Al2O3+ PdO |
| Other Name | DE-OXO Catalyst |
| Conditions | New Catalyst Only |
| Brand Name | PSG Engineering |
Preferred Buyer From
| Location | Worldwide |
Palladium Catalysts Coated On Alumina For Nitrogen Gas Plant
- Classification: Catalyst
- Palladium content: 0.3%, 0.5%, 1.0%
- Palladium catalyst Grade: Industrial grade
- Palladium catalyst Granularity: 100mesh(or following your demand)
- Moisture: ≤ 3.0%
- Features: Good hydrogenation conversion, selectivity and stable performance
- Operation instructions:-
The product is already activated and could be loaded and used directly. Whether should the deoxy genate be pre-heated (to 50-80 ° C) or not depends onoxygen content in raw gas. The working temperature should be lower than 450 ° C
Use:
Nitrogen or argon separated from air could be purified up to 1 ppm oxygen content after on deoxygenating step. The oxygen content can be reduced to 0.1 ppm. Palladium catalyst Application: It's a kind of high efficient deoxidizer, Can be used for hydrogen, nitrogen and argon, krypton etc. Various gas the depth purification. Widely used in metallurgy, chemical industry, light industry, electronic industries
Storage: Avoid damping and any adsorption of water or organic substance before use. Otherwise it must be regenerated
| Business Type | Manufacturer, Exporter, Supplier |
| Physical State | Solid(Balls) |
| Application | Used in Hydrogen & Nitrogen Plant |
| Grade Standard | Technical Grade |
| Packaging Size | As per Requirements |
| PD Content | 0.48-0.52 |
| Material | Palladium Catalyst |
| Size | 3-4;3-5 mm |
| Palladium content(wt) | 0.3-0.5- 1 % |
| Bulk Density | ≥0.70 g/ml |
| Crushing Strength | ≥59 N/P |
| Brand Name | PSG Engineering |
Preferred Buyer From
| Location | Worldwide |
We do not provide Used Palladium Catalyst
Classification: Catalyst.
- Palladium content: 0.3%, 0.5%, 1.0%
- Palladium catalyst Grade: Industrial grade
- Palladium catalyst Granularity: 100mesh(or following your demand)
- Moisture: ≤ 3.0%
- Features: Good hydrogenation conversion, selectivity and stable performance
Operation instructions:
- The product is already activated and could be loaded and used directly.
- Whether should the deoxy genate be pre-heated (to 50-80 ° C) or not depends on the oxygen content in raw gas.
- The working temperature should be lower than 450 ° C
Use:
- Nitrogen or argon separated from air could be purified up to 1 ppm oxygen content after on deoxygenating step.
- The oxygen content can be reduced to 0.1 ppm.
Palladium catalyst Application:-
It's a kind of high efficient deoxidizer, Can be used for hydrogen, nitrogen and argon, krypton etc. Various gas the depth purification. Widely used in metallurgy, chemical industry, light industry, electronic industries.
Storage:
Avoid damping and any adsorption of water or organic substance before use. Otherwise it must be regenerated.
